If your Mac still won’t boot normally, it could be an issue related to the extensions that load at boot time. You can find instructions for your Mac on Apple’s website here. If you have an Intel Mac, the process differs depending on whether it has a T2 security chip or not and whether it’s a desktop or a laptop. If you have an Apple Silicon Mac, you can skip this one because the SMC resets every time you boot your Mac. So, resetting it could help fix problems with booting. The system management controller (SMC) is responsible for managing power on your Mac. Now that we’ve ruled out the most obvious causes, it’s time to accept that there was a problem with the update and that you’re going to have to fix it. If that doesn’t work, try a different cable to connect it to your Mac. Try power cycling the display by unplugging it from the mains, waiting a few seconds, and plugging it back in again. Next, check the status light on your Mac: is it on? If so, then it is likely to be a problem with your monitor. Then, make sure the cable is securely connected to your Mac and your monitor. Make sure the display is connected to power and switched on. If your Mac doesn’t chime on startup, it can be difficult to tell whether the problem is with your Mac or display. If you use an external display with your Mac, it’s possible that what seems to be a failure of your Mac to boot might just be your display not working properly. If your MacBook has been unplugged for a while, let it charge for an hour before attempting to boot it again. Similarly, while MacBooks can run on battery power, you should keep them plugged into the mains while you upgrade. Your Mac won’t boot if it’s not getting mains power. The first thing to do if you’re using a desktop Mac is to make sure the power cable is plugged in securely. If it hasn’t finished by then, Ventura may be stuck in a boot loop. Give it at least a couple of hours after you start the process before you assume that there is a problem. So, what you think is your Mac failing to boot after an upgrade may just be your Mac not having finished upgrading. Your Mac may reboot several times during this process. It hasn’t finished updatingĪs with any major update, upgrading to Ventura takes a while and goes through different stages. There are lots of possible reasons why your Mac may appear not to have booted, and it’s important to rule them out one by one. macOS Ventura won’t boot: possible causes So, the first and most important step is to identify the problem and what’s causing it. There are a number of other reasons you may see a black screen after updating to Ventura, from basic (the power cable has come loose) to more complicated ones (an issue with the system management controller, for example). However, that’s not necessarily the cause and could be a coincidence. The temptation when your Mac won’t start after upgrading to Ventura is to blame the update. However, it’s rarely a serious problem and usually pretty straightforward to fix. That can be both dispiriting and worrying. That elation disappears pretty quickly though if your Mac doesn’t boot after the upgrade and all you see is a black screen. Most of us can’t wait to take advantage of the new features and improvements. Upgrading to a new version of macOS like Ventura is exciting. It will help delete obsolete files, manage your Mac performance, and free up gigabytes of hard drive space. If your Mac has slowed down after installing macOS Ventura, try CleanMyMac X.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |